50mm x 50mm x 3mm Mild Steel Angled Steel Bar Section

Equal 50 x 3mm Angled Steel

Our top-quality steel angled steel bar is cut, packed and shipped by our terrific team in Warrington, UK within 24 hours. We pride ourselves on our speed for orders of all sizes.

Speciality Metals boast an enormous range of mild steel angle. If you require stainless steel or aluminium we’ve got you covered. We truly are an industry leader among suppliers of many metal products. With our in-house capabilities, we can provide virtually anything you need for your project.

Speciality Metals’ 50mm x 50mm x 3mm Mild Steel Angled Steel Bar Section stands out for its durability, recyclability, malleability and cost effectiveness. Also available for UK supply, this product offers excellent welding, bending, forming and machining capabilities. A reliable and cost-effective solution, whether you’re working on construction projects, metalworking or other fabrication tasks, this angled steel bar section makes a great choice. You won’t be disappointed if you choose the 50mm x 50mm x 3mm Mild Steel Angled Steel Bar Section if you want a product that ticks all the boxes.

We  the exact suppliers for you because:

• Specialists in rapid small volume orders
• FREE UK delivery on all orders
• Orders dispatch within 24 hours of order
• Located in Warrington, UK 
• Our experienced staff are experts in the mesh market and care personally about your customer experience

Check out our blog discussing mild steel angle. This gives you a beginners guide to the product which should answer any question that you may have.

In addition to being a very useful fence post, our mild steel angle iron bar is also suitable for the construction of fences or trailers. As a result, it offers a solid and reliable structure as well as a high degree of recycling, making it a very environmentally friendly choice. We offer this section bar in a variety of sizes and thicknesses.

Key product details:

• Angular Iron Dimensions – 50 x 50mm
• Thickness – 5mm
• Metal – Mild Steel DC01
• Finish – Hot Rolled

We also carry a wide range of mild steel sheet metal and flat bar.

Can Mild Steel Angle Bars be Drilled?

Yes, mild steel angle bars can be drilled. Mild steel is relatively soft and ductile compared to other types of steel, which makes it easier to drill. However, there are some tips to consider when drilling mild steel angle bars:

1. Drill Bit: Use a high-speed steel (HSS) drill bit or a cobalt drill bit for drilling mild steel. These types of drill bits are harder and more resistant to heat than regular steel drill bits.

2. Lubrication: Use a cutting oil or lubricant to reduce friction and heat during the drilling process. This will help to prolong the life of the drill bit and make the drilling process smoother.

3. Drilling Speed: Do not drill too fast, as this can cause the drill bit to overheat and become dull. Start with a slow speed and gradually increase it as the drill bit penetrates the steel.

4. Pilot Hole: For larger holes, it is recommended to drill a smaller pilot hole first. This will help to guide the drill bit and make it easier to drill the larger hole.

5. Clamping: Make sure the angle bar is securely clamped to prevent it from moving during the drilling process.

Can Mild Steel Angle Bars be Powder Coated?

Yes, mild steel angle bars can be powder coated. Powder coating is a type of coating that is applied as a free-flowing, dry powder. It is usually used to create a hard finish that is tougher than conventional paint. Mild steel is a good candidate for powder coating as it does not contain a high level of carbon, which can sometimes cause problems with the coating process.

Before powder coating, the mild steel should be properly prepared to ensure the best possible finish. This usually involves cleaning the steel to remove any dirt, grease or oil, and then sandblasting or otherwise abrading the surface to remove rust and provide a good surface for the coating to adhere to. Once the surface is prepared, the powder coating can be applied using a spray gun, and then the coated steel is cured in an oven to harden and set the coating.

Are Mild Steel Angle Bars Magnetic?

Yes, mild steel angle bars are magnetic. Mild steel, also known as low carbon steel, is made from iron and a small amount of carbon, which makes it ferromagnetic. This means it is attracted to magnets and can also be magnetised. This property makes mild steel useful in applications where magnetic properties are required, such as in motors and transformers.

Can Mild Steel Angle Bars be Used for Electrical Applications?

Mild steel angle bars can be used for certain electrical applications, but there are some considerations to keep in mind:

1. Magnetic Properties: Mild steel is ferromagnetic, which means it is attracted to magnets and can be magnetised. This property can be advantageous in some applications, such as in the cores of transformers and inductors, where magnetic properties are desired.

2. Conductivity: Mild steel is a relatively good conductor of electricity, but it is not as good as some other materials like copper or aluminum. This means that it will have higher resistance and can generate more heat when conducting electricity. This may not be a problem for some applications, but it is something to consider if you need a material with very low electrical resistance.

3. Corrosion Resistance: Mild steel is not very resistant to corrosion, which can be a problem in electrical applications where moisture or corrosive substances are present. This can lead to electrical failures and safety hazards. However, this can be mitigated by applying a protective coating, such as paint or a galvanised coating, to the steel.